Incoming Call Display - Panasonic KX-TD816E Installation Manual

622
Description
Selection
Default
Programming
Conditions
Feature References
4-142.4 System Programming
4.8 Extension Programming

Incoming Call Display

Allows you to choose between three display types when an
incoming call is received.
"Caller" means the incoming caller's telephone number and name
are displayed. "CO Line" means the CO line number and CO line
name assigned in the program [421] are displayed. "DDI" means
the called party's DDI number and extension name are displayed.
• Jack number: KX-TD816 – 01 through 16,
KX-TD1232 – 01 through 64,
( =all jacks)
• Display Types: Caller / CO Line / DDI
All jacks – Caller
1. Enter 622.
Display: Incoming Display
2. Press NEXT.
Display: Jack NO?→
3. Enter a jack number.
To enter jack number 01, you can also press NEXT.
Display example: #01:Caller
4. Keep pressing SELECT until the desired selection is
displayed.
5. Press STORE.
6. To program another jack, press NEXT or PREV, or SELECT
and the desired jack number.
7. Repeat steps 4 through 6.
8. Press END.
• For the KX-TD1232, jack numbers 01 through 32 are for the Master
System and 33 through 64 are for the Slave, if available.
• To assign all jacks to one selection, press the
case, the display shows the contents programmed for jack 01.
Section 3, Features,
CO Incoming Call Information Display
Display, Call Information
key in step 3. In this