Panasonic KX-TD816E Installation Manual page 127

3 Features
Programming References
Feature References
Operation References
C
all Pickup, CO Line
Description
Conditions
Programming References
Feature References
Operation References
—User Manual
Call Hold, Exclusive Call Hold or Consultation Hold). In this case, if
the extension user remains off-hook after the completion of an outgoing
outside call, the system does not release all the switches used to
establish the connection, and a CO line connected will continue to be
seized. To prevent this, it is administrable to make CPC Signal
Detection work on outgoing outside calls. (Note: Some Central Offices
may send CPC-like signals during the dialling sequence and an attempt
to make a call may be terminated. If your CO does not send such
signals, it is recommended to make CPC Signal Detection work on
outgoing outside calls.)
• If your Central Office does not send CPC-like signals, it is also
effective to limit the dialled numbers during a call by the program [991]
"COS Additional Information" on a Class of Service basis to prevent
unauthorized calls.
• If CPC Signal is detected during a Conference call, the line is
disconnected and the remaining two parties maintain the call.
Section 4, System Programming,
[405] CPC Signal Detection Incoming Set
[415] CPC Signal Detection Outgoing Set
[991] COS Additional Information, Field (1)
None
Not applicable.
Allows any extension user to answer an incoming outside call that
is ringing at another's telephone.
• Call Pickup starts with the lowest CO number.
• Confirmation tone is sent to the user when the call is picked up.
Eliminating the tone is programmable.
Section 4, System Programming,
[100] Flexible Numbering, Call pickup, CO line
[990] System Additional Information, Field (16)
None
DPT Features, SLT and ISDN Telephone Features;
Call Pickup, CO Line
C
Features 3-29