Reverse Circuit Assignment - Panasonic KX-TD816E Installation Manual

4.6 CO Line Programming
Description
Selection
Default
Programming
Conditions
Feature References

Reverse Circuit Assignment

Enables or disables to detect Reverse Circuit.
• CO line number:
KX-TD816 – 01 through 08,
KX-TD1232 – 01 through 24,
• Regular (no detection) / Reverse (detection)
All CO lines – Regular
1. Enter 416.
Display: Reverse Circuit
2. Press NEXT.
Display: CO Line NO?–>
3. Enter a CO line number.
To enter CO line number 01, you can also press NEXT.
Display example: CO01:Regular
4. Keep pressing SELECT until the desired selection is
displayed.
5. Press STORE.
6. To program another CO line, press NEXT or PREV, or
SELECT and the desired CO line number.
7. Repeat steps 4 through 6.
8. Press END.
To assign all CO lines to one selection, press the
case, the display shows the contents programmed for CO01.
Section 3, Features,
Reverse Circuit
( =all CO lines)
( =all CO lines)
key at step 3. In this
System Programming
416
4-103