4.3
System Programming
Hunting Intercept — Day / Night
Description
Selection
Default
Programming
Conditions
Feature References
Sets the Intercept destination in both day and night modes for each
hunting group.
• Hunting group number: 01 through 32
• Extension number: 2 through 4 digits / Disable (no Intercept
Routing)
All hunting groups – Disable — Day / Night
1.
Enter a program address (134 for day or 135 for night).
Display example: Hunt Intercp Day
2.
Press NEXT.
Display: Group NO.?→
3.
Enter the hunting group number.
To enter hunting group number 01, you can also press NEXT.
Display example: 01: Disable
4.
Enter an extension number.
To change the current entry, press CLEAR and enter the new number.
To disable Intercept Routing, press CLEAR.
5.
Press STORE.
6.
To program another hunting group, press NEXT or PREV, or
SELECT and the desired hunting group number.
7.
Repeat steps 4 through 6.
8.
Press END.
• You can set the extension numbers in programs [003] "Extension
Number Set," [127] "Voice Mail Extension Number Assignment," [130]
"Phantom Extension Number" and also floating numbers of the external
ringer, hunting groups, and pagers in program [813] "Floating Number
Assignment."
Section 3, Features,
Intercept Routing
134-135
System Programming
4-69.6