657
8.4
Description
Selection
Default
Programming
Conditions
Feature References
8-50
DECT Portable Station Section
DECT PS System Programming
PS Class of Service
Programs each PS a Class of Service (COS). The COS determines
the call handling abilities for each PS. Primary and secondary COS
numbers can be assigned for each PS.
• PS registration number: KX-TD816 – 01 through 16,
• COS number: 1 through 8
All PSs – Primary / Secondary – COS 1
1.
Enter 657.
Display: PS COS Assign
2.
Press NEXT.
Display: PS NO?→
3.
Enter the PS registration number.
You can also keep pressing NEXT until the desired PS registration
number is displayed.
Display example: PS01:COS1, COS1
4.
Enter a primary COS number.
To change the current entry, enter the new number.
5.
Press
.
6.
Enter a secondary COS number.
To change the current entry, enter the new number.
7.
Press STORE.
8.
To program another PS, press NEXT or PREV, or SELECT
and the desired PS registration number.
9.
Repeat steps 4 through 8.
10.
Press END.
• There is a maximum of eight Classes of Service. Every PS must be
assigned to a Class of Service and is subject to COS Programming in
programs [500] through [518] and [991].
• To assign all PSs to one COS, press the
the display shows the contents programmed for the PS which has the
lowest PS registration number.
Section 3, Features
Class of Service (COS)
KX-TD1232 – 01 through 64,
( =all PS registration numbers)
key in step 3. In this case,