Panasonic KX-TD816E Installation Manual page 140

C
C
O Line Connection Assignment – Outgoing
Description
Conditions
Programming References
Feature References
Operation References
C
O Line Group
Description
Conditions
3-40 Features
Allows you to assign the CO line an extension user can use for
outgoing calls. This feature is useful to prevent unauthorized toll
calls.
• When an extension user tries to make an outside call on a disallowed
CO line, reorder tone is sent to indicate that the user cannot use the CO
line.
• Day and Night Service are individually programmed. (Night Service)
Section 4, System Programming,
[605]–[606] Outgoing Permitted CO Line Assignment — Day / Night
[615]–[616] Outgoing Permitted CO Line Assignment — Day / Night for
ISDN Extension
None
Not applicable.
CO lines can be grouped into up to eight CO line groups. This
allows extensions to call outside parties without designating a
specific CO line, since a CO line is automatically selected from the
designated CO line group. All CO lines belonging to a CO line
group follow the assignment determined for that CO line group. A
list of assignments for each CO line group is shown below:
• The destination of Intercept Routing
• Disconnect Time
• Register Recall Signal Time
• Host PBX Access Code
• Pause Time (used in Speed Dialling and Recall)
• Each CO line can only belong to one CO line group.
• CO lines in a CO line group are selected uniformly if all lines belong to
the same system.
• If System Connection* is employed, a CO line group can include CO
lines in both systems. In this case, a CO line is first selected from the
user's system. If all lines in the user's system are in use, a line in the
other system is selected.
3 Features
*: Available for KX-TD1232 only.