4.4
Timer Programming
Description
Selection
Default
Programming
Conditions
Feature References
Automatic Redial Interval Time
Sets the interval time between Automatic Redial attempts.
Time (seconds): 3 through 120 (
12 (120 s)
1.
Enter 210.
Display: Interval Time
2.
Press NEXT.
Display example: Time:
3.
Enter the time.
To change the current entry, press CLEAR and the new time.
4.
Press STORE.
5.
Press END.
• You enter a number from 3 through 120. The actual time is 10 times
your input.
• Program [209] "Automatic Redial Repeat Times" is used to set the
number of times Automatic Redial is tried.
• You cannot leave the entry empty.
Section 3, Features,
Redial, Automatic
10 is the actual time)
120
sec
System Programming
210
4-79