Epson Stylus Pro 7710 Service Manual page 90

Epson Stylus Pro 7700/7710/7900/7910/9700/9710/9900/9910
No. Message on LCD
52 DEVICE ALIGNMENT
ADJUSTMENT NOT COMPLETE
ILS20EP DISCONNECTED
53
ILS20EP IS DISCONNECTED
DO YOU CONTINUE?
NO
YES
54 MAINTENANCE REQUEST
NNNN
*NNNN is the error number.
MAINTENANCE REQUEST
CODE NNNN
REFER TO THE MANUAL
*NNNN is the error number.
55 CALL FOR SERVICE
NNNN
CONTACT
THE REPAIR CENTER
*NNNN is the error number.
CALL FOR SERVICE
CODE NNNN
POWER OFF AND THEN ON.
IF THIS DOES'T WORK,
NOTE THE CODE AND COLL
FOR SERVICE
*NNNN is the error number.
TROUBLE SHOOTING
Description
The initial settings have not been made for the
SpectroProofer.
The color measurement device (ILS20EP) is not connected
properly.
See 3.4 "Remedies for Maintenance Requests"
See 3.5 "Remedies for Service Call Error"
Remedies for Error Messages
Remedy/Points to be checked
Refer to the user's guide to make initial settings to the SpectroProofer.
Select NO, and turn the printer off. Then re-connect the color
measurement device (ILS20EP) properly. If you select YES, the printer
continues printing.
(See P.97).
(See P.99).
Revision D
91