Epson Stylus Pro 7710 Service Manual page 354

Epson Stylus Pro 7700/7710/7900/7910/9700/9710/9900/9910
3. Start the Service Program and select
Figure 5-80. [Firmware Update Tool] Screen
4. Click [Browse], and select a firmware data.
5. Click [Update] to transfer the firmware data.
When updating starts, a progress bar is displayed on the Control
C A U T I O N
Panel of the printer. After updating is complete, the printer restarts
automatically. Make sure not to turn off the printer until updating
is complete. Otherwise, the printer may not operate normally
afterward.
6. When writing the firmware is completed, the printer should be rebooted.
7. Click [Exit].
ADJUSTMENT
Firmware Update Tool.
Other Adjustment
Revision D
355