Epson Stylus Pro 7710 Service Manual page 227

Epson Stylus Pro 7700/7710/7900/7910/9700/9710/9900/9910
4.4.6.7 AID Board
When powering this product, high-voltage current may be applied
W A R N I N G
on the AID Board. To prevent ELECTRIC SHOCK, do not touch
the AID Board when the power is ON. If the shock should happen,
the flowing current is very tiny, about a few hundreds μA, therefore
it will not do any harm on the human body.
1. Remove the Control Panel. (p142)
2. Remove the IC Cover R and the IC Shaft Cover R.
3. Remove the Maintenance Tank R.
4. Remove the Right Cover. (p148)
5. Remove the two screws that secure the AID Board Cover, and remove the AID
Board Cover.
A) Silver, Phillips, Bind machine screw M3x8: two pieces
DISASSEMBLY & ASSEMBLY
(p145)
(p147)
Disassembly and Assembly Procedure
- Top right -
AID Board Cover
Figure 4-139. Remove the AID Board Cover
Revision D
A
228