Epson Stylus Pro 7710 Service Manual page 249

Epson Stylus Pro 7700/7710/7900/7910/9700/9710/9900/9910
4.4.7.5 Power Supply Board
1. Remove the Flange from the Auto Take-up Reel.
2. Remove the Take-up Reel Cover.
3. Remove the two screws that secure the Plate A, and remove the Plate A.
A) Black, Phillips, Bind S-tite M3x6: two pieces
4. Remove the two screws that secure the Plate B, and remove the Plate B.
B) Black, Phillips, Bind S-tite M3x6: one piece
C) Black, Phillips, Bind S-tite M4x8: one piece
DISASSEMBLY & ASSEMBLY
(p245)
Disassembly and Assembly Procedure
Flange
Figure 4-169. Removing the Flange
C
Plate B
B
Figure 4-170. Removing the Plate A/B
Revision D
Auto Take-up Reel
Plate A
A
250