Epson Stylus Pro 7710 Service Manual page 329
Large format color inkjet printer
Hide thumbs
Also See for Stylus Pro 7710:
- Service manual (519 pages) ,
- Network manual (43 pages) ,
- Unpacking and setup manual (30 pages)
Table of Contents
Advertisement
Epson Stylus Pro 7700/7710/7900/7910/9700/9710/9900/9910
Creating Color ID Data (at color measuring site)
1.
Start the Service Program, and select [Colorimetric Calibration Tool].
2.
Click [Run] to start "Colorimetric Calibration Tool".
3.
Click [Create Color ID].
4.
Select the type of the currently used black ink from the "BlackInk" pull-down
menu, and click [Next].
5.
Perform Step 5 through 12 of
"Adjustment Procedure (Entire Process Workflow)"
to print the calibration chart.
6.
Enter the 10-digit serial numbers that are printed on the calibration chart, and click
[Next]
7.
Click [Save], make sure that the file name is equivalent to the main unit serial
number, and save the color ID data (dat format).
8.
Click [End].
9.
Send the color ID data acquired in the procedure to the repair work site.
ADJUSTMENT
Figure 5-57. Generating Colorimetric Calibration ID Data
Head Related Adjustments
Revision D
Perform the color
measurement
330
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
