Epson Stylus Pro 7710 Service Manual page 328

Epson Stylus Pro 7700/7710/7900/7910/9700/9710/9900/9910
ADJUSTMENT PROCEDURE (SEPARATE WORKFLOW)
Printing Calibration Chart (at repair work site)
1. Turn the printer power on.
2. Start the Service Program and select [Colorimetric Calibration Tool].
3. Click [Run] to start "Colorimetric Calibration Tool".
4. Click [Print a Calibration Chart].
5. Perform Step 5 through 12 of "Adjustment Procedure (Entire Process Workflow)"
to print the Calibration chart.
6. Lay one plain paper on the print surface of the Calibration chart, put them in a
clear file together with the alignment check pattern, and send them to a place
where the color measuring is carried out.
The printed calibration charts should be sent to a color-measuring
C A U T I O N
site immediately, as the color of the patch may be discolored in a
week.
ADJUSTMENT Head Related Adjustments
Figure 5-56. Printing Calibration Chart
Revision D
329