Epson Stylus Pro 7710 Service Manual page 86

Epson Stylus Pro 7700/7710/7900/7910/9700/9710/9900/9910
No. Message on LCD
22 SOME NOZZLES ARE CLOGGED
23 CLEANING ERROR
NOT ENOUGH INK OR SPACE IN MAINT TANK
CONTINUE CLEANING?
YES (RECOMMENDED)
NO
24 CLEANING ERROR
NOT ENOUGH INK
CONTINUE CLEANING?
YES (RECOMMENDED)
NO
25 CLEANING ERROR
NOT ENOUGH EMPTY SPACE
IN MAINT TANK
CONTINUE CLEANING?
YES (RECOMMENDED)
NO
26 INK TOO LOW TO CLEAN
REPLACE INK CARTRIDGE
27 INK TOO LOW TO CLEAN
THE CARTRIDGE BEING USED CAN BE
INSTALLED AGAIN FOR PRINTING
28 NO CARTRIDGE
INSTALL INK CARTRIDGE
INK CARTRIDGE
29
INK LOW REPLACE INK CARTRIDGE
BLACK INK MISMATCH
30
THE TYPE OF BLACK INK IS DIFFERENT
TO CANCEL PRINTING
CANCEL THE PRINT JOB
TO CONTINUE PRINTING
CHANGE THE BLACK INK
31 INK LOW
TROUBLE SHOOTING
Description
Even though the auto cleaning in printing start time is
carried out one or two times, some nozzles are still clogged.
This message continues to be displayed until the nozzle
clogging is solved; however, printing is available then.
There is not enough ink or space in the maintenance tank to
perform cleaning.
There is not enough ink to perform cleaning.
There is not enough space in the maintenance tank to
perform cleaning.
There is not enough ink to perform cleaning.
There is not enough ink to perform cleaning.
No ink cartridge is installed.
The Ink Cartridge is not recognized.
The ink cartridge is expended.
The setting of the black ink cartridge differs from the printer
and printer driver.
The ink cartridge is nearly expended.
Remedies for Error Messages
Remedy/Points to be checked
Check if missing patterns occur in the nozzle check patterns by the
nozzle check. If any, perform the cleaning again.
By clicking YES, the message to replace the ink cartridge or
maintenance tank appears.
Replace the ink cartridge or maintenance tank with a new one to
continue cleaning. (See P.147)
By clicking YES, the message to replace the ink cartridge appears.
Replace the ink cartridge with a new one to continue cleaning.
By clicking YES, the message to replace the maintenance tank appears.
Replace the maintenance tank with a new one to continue cleaning.
P.147)
Replace the ink cartridge with a new one.
Replace the ink cartridge with a new one.
Install the Ink Cartridge.
Remove the Ink Cartridge once, and install it again correctly.
Check the connection between the Ink Cartridge and the Main Board
Assy.
Replace the Ink Cartridge with a new one.
Replace the Ink Cartridge with a new one.
To continue printing, press the button to change the black ink.
Replacement of the ink cartridge is nearly needed.
Revision D
(See
87