Epson Stylus Pro 7710 Service Manual page 87

Large format color inkjet printer
Hide thumbs Also See for Stylus Pro 7710:
Table of Contents

Advertisement

Epson Stylus Pro 7700/7710/7900/7910/9700/9710/9900/9910
No.
Message on LCD
32
INK CARTRIDGE ERROR
REPLACE CARTRIDGE
33
NO MAINTENANCE TANK
INSTALL THE LEFT SIDE MAINTENANCE TANK
NO MAINTENANCE TANK
INSTALL THE RIGHT SIDE MAINTENANCE
TANK
34
NOT ENOUGH EMPTY SPACE
REPLACE THE LEFT SIDE MAINTENANCE
TANK
NOT ENOUGH EMPTY SPACE
REPLACE THE RIGHT SIDE MAINTENANCE
TANK
REPLACE MAINTENANCE TANK SOON
MAINTENANCE TANK ERROR
35
REPLACE THE LEFT SIDE MAINTENANCE
TANK
MAINT TANK ERROR
REPLACE THE RIGHT SIDE MAINTENANCE
TANK
MAINT TANK
36
REPLACE THE LEFT SIDE MAINTENANCE
TANK
MAINT TANK
REPLACE THE RIGHT SIDE MAINTENANCE
TANK
TROUBLE SHOOTING
Description
The connection failure between the CSIC and the connection
terminals of the printer.
The CSIC has a defect.
The dew condensation occurs to the Ink Cartridge.
The Maintenance Tank (L or R) is not set in the printer.
The maintenance tank (L or R) is not recognized.
The maintenance tank is almost full so the cleaning cannot
be performed.
The maintenance tank is not correctly set in the printer.
The maintenance tank (L or R) is not recognized.
The maintenance tank is full.
Remedies for Error Messages
Remedy/Points to be checked
Remove the Ink Cartridge once, and install it again correctly.
Replace the Ink Cartridge with a new one.
Replace the Ink Cartridge with a new one.
Leave the Ink Cartridge at the room temperature for more than four
hours and install it again.
Install the Maintenance Tank (L or R) correctly.
Remove the Maintenance Tank (L or R) once, and install it again
correctly.
Check the connection between the Maintenance Tank (L or R) and the
Main Board Assy.
Replace the Maintenance Tank (L or R) with a new one.
Replace the Maintenance Tank with a new one.
Remove the Maintenance Tank (L or R) once, and install it again
correctly.
Remove the Maintenance Tank (L or R) once, and install it again
correctly.
Check the connection between the Maintenance Tank (L or R) and the
Main Board Assy.
Replace the Maintenance Tank (L or R) with a new one.
Replace the maintenance tank with a new one.
Revision D
(See P.147)
(See P.147)
88

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Stylus pro 9900Stylus pro 7900

Table of Contents