Epson Stylus Pro 7710 Service Manual page 141

Epson Stylus Pro 7700/7710/7900/7910/9700/9710/9900/9910
4.4.2 Housing
4.4.2.1 Control Panel
1. Insert a flathead screwdriver or a similar tool into the holes on both sides of the
Control Panel to unlock the two hooks, and detach the Control Panel.
2. Disconnect the FFC from the connector on the Control Panel.
Be sure to refer to Chapter 5 "Adjustment"
A D J U S T M E N T
R E Q U I R E D
specified adjustments after replacing or removing the Control
Panel.
<Adjustment item>
1. Color LCD Display Check
2. Button Operation Check
DISASSEMBLY & ASSEMBLY
(see p283) and perform
Disassembly and Assembly Procedure
Hooks
Figure 4-11. Removing the Control Panel
Control Panel
FFC
Figure 4-12. Disconnecting the FFC
Revision D
Control Panel
142