Epson Stylus Pro 7700/7710/7900/7910/9700/9710/9900/9910
14. Disconnect the connector (CN307) on the Sub Board Assy; C.
15. Release the harness from the clamp 1.
16. Release all the harnesses from the clamp 2.
DISASSEMBLY & ASSEMBLY
- Left side -
Sub Board Assy; C
- Left inside -
Disassembly and Assembly Procedure
CN307
Figure 4-93. Disconnecting the connector
Clamp 1
Clamp 2
Figure 4-94. Releasing the Harness
Revision D
198