Epson Stylus Pro 7710 Service Manual page 142

Epson Stylus Pro 7700/7710/7900/7910/9700/9710/9900/9910
4.4.2.2 IC Cover (L/R)
Basically you can remove this part on the left and the one on the
C H E C K
right in the same way. Therefore this section describes the way to
P O I N T
remove the one on the right only.
1. Turn the printer ON.
2. Press the [Ink Cover Open] button on the Control Panel to open the IC Cover R.
3. Turn the printer OFF.
In the case that the IC Cover cannot be opened by the Control
C H E C K
P O I N T Panel operation for some reasons, follow the procedure of 4.4.1.2
Unlocking the IC Cover manually
4. Pull the IC Cover downwards to disconnect the joints to remove the IC Cover R.
DISASSEMBLY & ASSEMBLY
(p141) to open the IC Cover.
Disassembly and Assembly Procedure
Joints
Figure 4-13. Removing the IC Cover (L/R)
Revision D
IC Cover R
143