Epson Stylus Pro 7710 Service Manual page 310

Epson Stylus Pro 7700/7710/7900/7910/9700/9710/9900/9910
10. Tighten the screws (x6) loosened in
11. Close the Front Cover (Middle).
12. Print the adjustment pattern again and check the adjustment result.
13. Repeat Step 4 to Step 12 till the adjustment is finished.
14. After finishing the adjustment, press [OK] while
the Printhead. Then, turn the printer OFF and finish the adjustment.
ADJUSTMENT
Step 8.
[Enter] Cap is displayed to cap
Head Related Adjustments
Revision D
311