Epson Stylus Pro 7710 Service Manual page 279

Epson Stylus Pro 7700/7710/7900/7910/9700/9710/9900/9910
6. Remove the screw that secures the Carriage Motor mounting plate, and remove the
Carriage Motor mounting plate.
B) Silver, Phillips, Bind machine screw M4x8: one piece
7. Remove the two screws that secure the Carriage Motor, and remove the Carriage
Motor.
C) Silver, Phillips, Bind machine screw M3x6: two pieces
Be sure to refer to Chapter 5 "Adjustment"
A D J U S T M E N T
R E Q U I R E D
specified adjustments after replacing the Carriage Motor.
<Adjustment Item>
1. Counter Clear (Carriage Motor)
DISASSEMBLY & ASSEMBLY
(see p283) and perform
Disassembly and Assembly Procedure
B
Carriage Motor mounting plate
Figure 4-218. Removing the Carriage Motor mounting plate
Clamp
C
Figure 4-219. Removing the Carriage Motor
Revision D
Carriage Motor
C
280