Epson Stylus Pro 7710 Service Manual page 146

Epson Stylus Pro 7700/7710/7900/7910/9700/9710/9900/9910
4.4.2.6 Maintenance Tank (L/R)
Basically you can remove this part on the left and the one on the
C H E C K
right in the same way. Therefore this section describes the way to
P O I N T
remove the one on the right only.
Make sure to use the Maintenance Tank with the type specified
C A U T I O N
below.
Epson Stylus Pro 7900/7910/9900/9910:
C12C890191 / C12C890193
Epson Stylus Pro 7700/7710/9700/9710:
C12C890501 / C12C890502
1. Pull the handle of the Maintenance Tank R and remove the Maintenance Tank R.
NOTE: Epson Stylus Pro 7700/7710/7900/7910 does not have the Maintenance
Tank L.
DISASSEMBLY & ASSEMBLY Disassembly and Assembly Procedure
Maintenance Tank R
Figure 4-17. Removing the Maintenance Tank (L/R)
Revision D
147