Epson Stylus Pro 7710 Service Manual page 378

Epson Stylus Pro 7700/7710/7900/7910/9700/9710/9900/9910
Be sure to spread a sheet of paper or cloth on the work space
C A U T I O N
before removing any ink-path-related parts or components to
keep the space from being soiled with leaked ink.
Do not touch electrical circuit boards with bare hands as the
elements on the board are so sensitive that they can be easily
damaged by static electricity. If you have to handle the boards
with bare hands, use static electricity discharge equipment such
as anti-static wrist straps.
When the printer has to be operated with the covers removed,
take extra care not to get your fingers or clothes caught in
moving parts such as the drive gear unit or carriage unit.
The cutter blade is razor-sharp. Be especially careful when
handling the cutter.
Carbide blade employed as the cutter blade is hard but brittle.
Be careful not to hit it against metal parts of the printer since it
can be easily damaged.
When the printer needs to be repacked for transportation after
being used, make sure to follow the steps below after turning
the power OFF.
1. Check that the Printhead is capped properly.
2. Remove all the ink cartridges.
3. Repack the printer using the packaging box, cushioning
materials and protective equipment indicated in the
unpacking guide.
MAINTENANCE Overview
Revision D
379