T&B&S Adjustment - Epson Stylus Pro 7710 Service Manual

Epson Stylus Pro 7700/7710/7900/7910/9700/9710/9900/9910
8. Disconnect the FFC, and remove the Ink Mark Sensor.
Be sure to refer to Chapter 5 "Adjustment"
A D J U S T M E N T
R E Q U I R E D
specified adjustments after replacing or removing the Ink Mark
Sensor.
<Adjustment Item>
1. Ink Mark Sensor Height Adjustment
2. Ink Mark Sensor Adjustment
3. Skew Check
4. T&B&S Adjustment
5. Absorber Position Check
6. Auto Uni-D Adjustment
7. Auto Bi-D Adjustment
DISASSEMBLY & ASSEMBLY
(see p283) and perform
Disassembly and Assembly Procedure
Ink Mark Sensor
Figure 4-143. Removing the Ink Mark Sensor
Revision D
FFC
231