Epson Stylus Pro 7710 Service Manual page 364

Epson Stylus Pro 7700/7710/7900/7910/9700/9710/9900/9910
5. Install the mounter on the printer.
6. Click on the [OK] button.
Figure 5-93. Mount Sensor Check Screen
7. Confirm the blue screen appears, click on the [OK] button.
Figure 5-94. Confirmation Screen
ADJUSTMENT
8. Enter the temperature around the printer and click on the [OK] button.
Figure 5-95. Temperature Input Screen
9. Take a measure according to the color of displayed screen.
Screen
Description
color
No abnormality
Blue
Thermistor is operating normally.
Orange Detected temperature differs slightly
from entered temperature. Or the
correct value cannot be obtained from
Yellow
the Thermistor.
Detected temperature differs
considerably from entered
Red
temperature. The thermistor might be
broken.
Figure 5-96. Confirmation Screen
Tests
Revision D
Remedy
Click on the [OK] button
Re-enter the temperature. If not
improved, replace the Thermistor.
(p. 269)
Replace the Thermistor. (p. 269)
365