Epson Stylus Pro 7710 Service Manual page 266

Epson Stylus Pro 7700/7710/7900/7910/9700/9710/9900/9910
4.4.8.9 Paper Pressing Plate Sensor
1. Remove the Color Measurement Device.
2. Remove the Mounter. (p259)
3. Remove the three screws that secure the shield plate, and remove the shield plate.
A) Silver, Phillips, Bind machine screw M3x6: three pieces
4. Disengage the hook that secures the Paper Pressing Plate Sensor, and remove the
Paper Pressing Plate Sensor.
5. Disconnect the connector from the Paper Pressing Plate Sensor.
DISASSEMBLY & ASSEMBLY
(p257)
Disassembly and Assembly Procedure
Figure 4-196. Removing the shield Plate
Paper Pressing Plate Sensor
Hook
Connector
Figure 4-197. Removing the Paper Pressing Plate Sensor
Revision D
Shield Plate
A
267