Initial Ink Charge Flag On/Off - Epson Stylus Pro 7710 Service Manual

Epson Stylus Pro 7700/7710/7900/7910/9700/9710/9900/9910

5.4.13 Initial Ink Charge Flag ON/OFF

This allows you to set whether initial ink charging is executed or not when turning the
power ON.
PROCEDURE
1. Turn the printer ON.
2. Start the Service Program and select
3. Select ON or OFF, and press [Run].
4. Turn the printer OFF.
5. If ON is selected, initial ink charge will be performed next time you start the
printer.
Figure 5-65. [Initial Ink Charge Flag ON/OFF] Screen
ADJUSTMENT
Initial Ink Charge Flag ON/OFF.
Head Related Adjustments
5.4.14 Initial Ink Charge
This is to execute the initial ink charge.
Make sure to check the ink remaining level and if the remaining
C A U T I O N
amount is less than 50%, replace the ink cartridge with a new one
before starting this adjustment.
PROCEDURE
1. Turn the printer ON in the Serviceman Mode.
Turn the power ON while pressing [Menu
simultaneously.
→
2. Select SELF TESTING Cleaning
3. Press [OK] while [Enter] Start
The initial ink charge sequence will be executed.
Revision D
] + [Paper Feed ] + [OK]
→
Init.Fill.
is displayed.
337