Menu Mode Settings - Epson Stylus Pro 7710 Service Manual

Epson Stylus Pro 7700/7710/7900/7910/9700/9710/9900/9910

1.5.1 Menu Mode Settings

Top Menu Menu Item
PLATEN GAP
PAGE LINE
PRINTER SETUP
ROLL PAPER MARGIN
PAPER SIZE CHECK
PRODUCT DESCRIPTION
Table 1-6. Menu Mode Settings List
Settings
(shaded one is the default)
NARROW
STANDARD
Sets the platen gap (gap between the printhead and the platen).
WIDE When the "Others" is selected in the PAPER TYPE of the CUSTOM PAPER menu, the platen gap designated at
the CUSTOM PAPER menu has a priority over the setting made here. Refer to
WIDER
WIDEST
ON
Sets whether to print a page line (line for manual cutting) on roll paper or not. The page line is printed when ON
is selected.
The vertical line may be printed when the roll paper width that is set in the printer driver is smaller than the
OFF
width of the roll paper that is loaded in the printer. This setting is available for roll paper only.
DEFAULT
Epson Stylus Pro 7900/7910/9900/9910
TOP/BOTTOM 15mm
Sets the margins for roll paper.
TOP 35/BOTTOM 15mm When the Default is selected, the top margin becomes 20mm and the bottom margin becomes 15mm for the
following paper types; Premium Glossy Photo Paper(250), Premium Semigloss Photo Paper(250), and Premium
15 mm
Luster Photo Paper(260).
3 mm
DEFAULT
TOP/BOTTOM 15mm
Epson Stylus Pro 7700/7710/9700/9710
Sets the margins for roll paper.
TOP 35/BOTTOM 15mm
When the Default is selected, the top margin becomes 20mm and the bottom margin becomes 15mm for the
TOP 45/BOTTOM 15mm
following paper types; Premium Glossy Photo Paper(250), Premium Semigloss Photo Paper(250), and Premium
3 mm Luster Photo Paper(260).
15 mm
Sets whether to detect the paper width or not.
ON
Setting to OFF deactivates the sensor that detects the paper width when paper is loaded on the printer. This
allows the user to use paper whose width is out of the sensor's detectable range. It means that the user can print
OFF
an image larger than the paper size. The user should know that doing so soils the platen and may cause a print
quality or any other trouble.
Control Panel
Explanation
"PG Settings List" on page
Revision D
Applied
model
√ √
49.
√ √
√
√
√ √
41