Epson Stylus Pro 7710 Service Manual page 253

Epson Stylus Pro 7700/7710/7900/7910/9700/9710/9900/9910
4.4.7.7 Main Board Assy
1. Remove the Flange from the Auto Take-up Reel.
2. Remove the Take-up Reel Cover.
3. Disconnect the connector (CN1) on the Main Board.
4. Remove the four screws that secure the Power Supply Unit, and remove the Power
Supply Unit.
A) Black, Phillips, Bind S-tite M3x6: four pieces
DISASSEMBLY & ASSEMBLY
(p245)
Disassembly and Assembly Procedure
Figure 4-177. Removing the Flange
A
A
A
CN1
Figure 4-178. Removing the Power Supply Unit
Revision D
Auto Take-up Reel
Flange
Power Supply Unit
Main Board
A
254