Epson Stylus Pro 7700/7710/7900/7910/9700/9710/9900/9910
9.
Remove the retaining ring and remove the Roll Paper Guide.
10. Pull out the pin from the shaft.
11. Remove the three screws that secure the Mounting.
C) Silver, Phillips, Bind machine screw M3x6: one piece
D) Black, Phillips, Bind machine screw M3x8: two pieces
12. Remove the Mounting.
13. Pull out the guide pin.
14. Remove the Roll Cover Assy by moving it to the left.
DISASSEMBLY & ASSEMBLY
- Right side -
Roll Paper Guide
D
Disassembly and Assembly Procedure
Retaining ring
Mounting
D
C
Guide pin
Figure 4-29. Removing the Roll Cover Assy (Right side)
Roll Cover Assy
Figure 4-30. Removing the Roll Cover Assy
Revision D
Pin
Shaft
Shaft
157