Cutting Of Roll Paper - Epson Stylus Pro 7710 Service Manual

Epson Stylus Pro 7700/7710/7900/7910/9700/9710/9900/9910

1.3.5 Cutting of Roll Paper

The printer offers two ways of cutting for roll paper.
Cut Method
Auto cut The printer automatically cuts paper with the built-in cutter.
The user can manually move the built-in cutter to cut paper, or use a
Manual cut commercially available cutter. Select this setting when using the Auto
Take-up Reel Unit.
Some types of roll paper cannot be cut with the built-in cutter. In
C A U T I O N
such cases, cut it manually with a commercially available cutter or
the like.
It may takes time for the cutting operation.
C H E C K
P O I N T
SETTING BEFORE PRINTING
The cut method setting can be made by the control panel or the printer driver.
When setting with the control panel (for printing a status sheet or etc.)
Press button to select the cut method.
Icon
Roll Auto Cut On
Roll Auto Cut Off
When setting from a computer
Select "Auto Cut" in the "Paper Setting" window of the printer driver.
PRODUCT DESCRIPTION
Description
Description
Printing Specifications
HOW TO CUT
Auto cut
The printer automatically cuts paper with the built-in cutter each time a page is
printed.
Manual cut
Follow the procedure below to cut paper at the desired position.
1. After a page is printed, press the
position.
2. Press the button. Select [Cut] from the selection screen on the display,
and press [OK] button. The built-in cutter moves and cuts the paper.
When the paper type is the one that the built-in cutter does not
C H E C K
P O I N T support, pressing the
for manual cutting using a commercially available cutter. Cut the
paper manually with your cutter or a similar tool along the lower
frame of the front cover.
When cutting the paper manually, make sure to confirm the
C A U T I O N
Spectroproofer backing is not installed.
Revision D
button to advance the paper to the cut
button advances the paper to the position
30