Epson Stylus Pro 7710 Service Manual page 291

Epson Stylus Pro 7700/7710/7900/7910/9700/9710/9900/9910
FIRMWARE UPDATE TOOL
The utility for updating firmware is started up.
1. Highlight the target adjustment item and click [OK].
Figure 5-4. Firmware Update Tool
PRINT IMAGE
Image data can be printed for quality check.
When printing an image
1. Turn the printer ON in the Serviceman Mode. Turn the power on while pressing
[Menu ], [Paper Feed ] and [OK] button.
2. Start the Service Program and select
3. Click [Open] and select any one of the image files.
4. Click [Print] to print the selected image.
5. After checking the printed image, Click [Finish].
ADJUSTMENT
PRINT IMAGE.
When printing the test pattern
1. Turn the printer ON in the Serviceman Mode. Turn the power on while pressing
[Menu ], [Paper Feed
2. Start the Service Program and select
3. Click [TEST Print] to print the test pattern.
In the test pattern, the patterns for the following adjustments are printed.
Alignment Check pattern
Printhead Slant Adjustment (CR) pattern
Printhead Slant Adjustment (PF) pattern
Uni-D Check pattern
Bi-D Check pattern
Overview
] and [OK] button.
PRINT IMAGE.
Figure 5-5. Pint Image
Revision D
292