Epson Stylus Pro 7710 Service Manual page 263

Epson Stylus Pro 7700/7710/7900/7910/9700/9710/9900/9910
4.4.8.7 Main Board
1. Remove the Color Measurement Device.
2. Remove the Mounter. (p259)
3. Remove the Front Cover. (p263)
4. Disconnect all the connectors and FFC on the Main Board.
Those connectors which are shown in the figure are not used.
5. Remove the eight screws that secure the Main Board, and remove the Main Board.
A) Silver, Phillips, Bind machine screw M3x6: six pieces
B) Silver, Phillips, Bind machine screw M2x6 (bit: No.1): one piece
C) Silver, Phillips, Bind machine screw M3x6: one piece
CN23 CN17*
CN1 CN24
Figure 4-192. Connector Locations
DISASSEMBLY & ASSEMBLY
(p257)
CN19 CN18
CN14*
CN11
CN10 CN15
CN8 CN26
CN22 CN28*
CN7 CN29*
*: Unused connectors
Disassembly and Assembly Procedure
Main Board
Main Board
CN4
CN2
CN3
Unused
Unused
Figure 4-193. Removing the Main Board (1)
Figure 4-194. Removing the Main Board (2)
Revision D
Unused
A
B
D
264