Epson Stylus Pro 7710 Service Manual page 387

Epson Stylus Pro 7700/7710/7900/7910/9700/9710/9900/9910
[Lubrication 5]
Part Name Roll Cover Assy (full side)
Lubrication Point On the contact point of the Roll Cover Assy with the mounting plate
Lubricants G-45
φ 2 x 3 mm x 6 points
Amount
Apply the grease to the six points, and spread it evenly over the area (in
Note
red) shown below.
Lubrication Point
MAINTENANCE
[Lubrication 6]
Part Name Carriage Unit
Lubrication Point On the contact point of the PG Cam with the Shield plate
Lubricants G-71
φ 2 x 3 mm (3 times each)
Amount
Apply the grease of the amount above three times each on the left and
Note the right sides at the points. Be careful not to apply it out of the width of
the cam.
Lubrication Point
Lubrication
Revision D
Lubrication Point
388