Epson Stylus Pro 7700/7710/7900/7910/9700/9710/9900/9910
19. Check that "11" is displayed on the Control Panel.
Carry out the adjustment if the displayed value is other than "11".
→
Go to
adjustment procedure
20. Press [Paper Set] to release the paper presser.
21. Check that "01" is displayed on the Control Panel while releasing the paper set.
Carry out the adjustment if the displayed value is other than "01".
→
Go to
adjustment procedure
22. After all the checking and adjustment, confirm all the values again.
ADJUSTMENT
Adjustment jig
Figure 5-70. Position for the thickness tool (0.4/0.8/0.9 in thickness)
Adjustment jig
Figure 5-71. Position for the thickness tool (0.5 in thickness)
PF Related Adjustment
Revision D
Setting direction
Paper Feed Roller Assy on
second from right side
Paper Feed Roller Assy on
second from right side
Setting direction
345