Epson Stylus Pro 7700/7710/7900/7910/9700/9710/9900/9910
MOUNTER + ILS TEST PROCEDURE
Preparation
1.
Start the inspection program.
2.
Install the Color Measurement Device, the
black backing.
3.
Connect the Color Measurement Device to the printer with a USB cable.
4.
Connect the printer to the computer with a USB cable.
5.
Turn on the mounter.
6.
Turn on the printer.
7.
Wait until the printer becomes ready to print.
NOTE: If an error related to the Color Measurement Device is
occurring, the message for it appears on the LCD of the
control panel.
8.
Select
MOUNTER + ILS TESTS
Figure 5-103. [MOUNTER + ILS] Menu Screen
ADJUSTMENT
holder, and the
white calibration tile
from the inspection program.
Tests
Revision D
368