Epson Stylus Pro 7710 Service Manual page 325

Epson Stylus Pro 7700/7710/7900/7910/9700/9710/9900/9910
31. Make sure that the date and time printed in the second line on the upper left of the
chart (measurable time and date) is within the range displayed under the heading
"GMT" on the lower screen. (If the date and time is not within the range, it is
necessary to print the chart again.)
32. Refer to Figure 5-50, lay the chart on the black paper (or sheet) with the upper part
of the chart facing left side, and set the scanning ruler onto the bottommost patch
line.
Figure 5-50. Setting the Chart and the Scanning Ruler
ADJUSTMENT
Sheet number
Sheet1
S/N : 0000000000
2008-08-29 10:57
(GMT 2008-08-29 01:57)
2008-09-05 10:52
(GMT 2008-09-05 01:52)
Head Related Adjustments
Main unit serial number
Printed date and time
Measurable date and time
Sheet1
S/N : 0000000000
2008-08-29 10:57
(GMT 2008-08-29 01:57)
2008-09-05 10:52
(GMT 2008-09-05 01:52)
Calibration
Patch
Figure 5-51. Measurable Date and Time Check
Revision D
326