Epson Stylus Pro 7710 Service Manual page 203

Epson Stylus Pro 7700/7710/7900/7910/9700/9710/9900/9910
8. Remove the two screws that secure the PF Motor, and remove the PF Motor from
the PF Motor Mounting Plate.
B) Silver, Phillips, Pan S-tite with S.W & P.W. M3x6: two pieces
Be sure to refer to Chapter 5 "Adjustment"
A D J U S T M E N T
R E Q U I R E D
specified adjustments after replacing or removing the PF Motor.
<Adjustment Item>
1. Counter Clear (PF Motor)
2. CR/PF Motor Current Input
3. PF Timing Belt Tension Adjustment
4. T&B&S Adjustment
DISASSEMBLY & ASSEMBLY
(see p283) and perform
Disassembly and Assembly Procedure
- Left side -
PF Motor Mounting Plate
PF Motor
Figure 4-103. Removing the PF Motor
Revision D
B
204