Epson Stylus Pro 7710 Service Manual page 252

Epson Stylus Pro 7700/7710/7900/7910/9700/9710/9900/9910
5. Remove the two screws that secure the Main Board Unit.
B) Black, Phillips, Bind S-tite M3x6: two pieces
6. Disconnect the connector from the Take-up Reel Motor, and remove the Main
Board Unit.
7. Remove the C-Ring.
8. Remove the four screws that secure the Motor Mounting Plate, and remove the
Motor Mounting Plate.
C) Black, Phillips, Bind S-tite M4x8: four pieces
9. Remove the two gears from the Motor Mounting Plate.
10. Remove the two screws that secure the Take-up Reel Motor, and remove the Take-
up Reel Motor.
D) Black, Phillips, Bind S-tite with S.W & P.W. M3x6: two pieces
B
B
Take-up Reel Motor
Figure 4-174. Removing the Main Board Unit
DISASSEMBLY & ASSEMBLY
Main Board Unit
Connector
Disassembly and Assembly Procedure
Motor Mounting Plate
C-Ring
Figure 4-175. Removing the Motor Mounting Plate
Take-up Reel Motor
Figure 4-176. Removing the Take-up Reel Motor
Revision D
C
Motor Mounting Plate
Gear
D
Gear
253