Epson Stylus Pro 7700/7710/7900/7910/9700/9710/9900/9910
4.4.8.6 Front Cover
This part is not an ASP.
1.
Remove the Color Measurement Device.
2.
Remove the Mounter.
(p259)
In the next step, make sure to confirm which screw is attached to
C H E C K
P O I N T
which location because various screws are used here.
3.
Remove the six screws that secure the Front Cover.
A) Silver, Phillips, Round Washer Head S-tite M3x6: three pieces
B) Silver, Phillips, Pan P-tite with S.W & P.W. M3x10: two pieces
C) Silver, Phillips, Pan S-tite with S.W & P.W. M3x6: one piece
4.
Hold up the Front Cover to remove it.
DISASSEMBLY & ASSEMBLY
(p257)
Disassembly and Assembly Procedure
Front Cover
Figure 4-190. Removing the Front Cover (1)
Front Cover
Figure 4-191. Removing the Front Cover (2)
Revision D
A
B
C
263