Printhead Slant Adjustment (Cr); Printhead Slant Adjustment (Pf) - Epson Stylus Pro 7710 Service Manual

Epson Stylus Pro 7700/7710/7900/7910/9700/9710/9900/9910
14. Remove the each screw that secure the CR Stopper, and remove the three CR
Stoppers.
B) Silver, Phillips, Bind S-tite with S.W & P.W. M3x8: each one piece
15. Remove the Carriage Unit by sliding it rightward.
Be sure to refer to Chapter 5 "Adjustment"
A D J U S T M E N T
R E Q U I R E D
specified adjustments after replacing or removing the Carriage
Unit.
<Adjustment Item>
1. Nozzle Check
2. Ink Mark Sensor Adjustment
3. Skew Check
4. T&B&S Adjustment
5. Absorber Position Check
6.

Printhead Slant Adjustment (CR)

7.

Printhead Slant Adjustment (PF)

8. Head PG Adjustment
DISASSEMBLY & ASSEMBLY
(see p283) and perform
Disassembly and Assembly Procedure
CR Stopper
B
CR Stopper
B
Figure 4-77. Remove the CR Stopper
Carriage Unit
Figure 4-78. Remove the Carriage Unit
Revision D
CR Stopper
B
188