Epson Stylus Pro 7710 Service Manual page 46

Epson Stylus Pro 7700/7710/7900/7910/9700/9710/9900/9910
Top Menu Menu Item
PAPER THICKNESS
HEAD ALIGNMENT
ALIGNMENT
NETWORK SETUP
IP ADDRESS
SETTING
NETWORK SETUP
IP, SM, DG SETTING
BONJOUR
INIT NETWORK
SETTING
PRODUCT DESCRIPTION
Table 1-6. Menu Mode Settings List
Settings
(shaded one is the default)
SELECT PAPER TYPE Sets thickness of paper to be used.
• When Epson paper is used, select the paper type.
SELECT THICKNESS
• When not Epson paper is selected, enter the thickness of the selected paper.
AUTO
Sets whether to carry out the head alignment adjustment automatically or manually.
AUTO:
The adjustment is carried out automatically after the adjustment pattern is printed.
MANUAL:
MANUAL
Select this to carry out the adjustment manually (visually check the patterns and enter selected values) after
printing the adjustment pattern.
DISABLE
Enables or disables the network settings.
The NETWORK SETUP menu items appear on the LCD only when this is set to ENABLE.
ENABLE
AUTO
Sets whether to set the IP address automatically or manually.
When the PANEL is selected, the IP, SM, DG SETTING menu is enabled to enter the address manually.
PANEL
000.000.000.000 -
IP
172.024.011.031
ADDRESS
- 255.255.255.255
000.000.000.000 -
SUBNET
255.255.192.168 Sets the IP address, subnet mask, and default gateway manually.
MASK
- 255.255.255.255
000.000.000.000 -
DEFAULT
255.024.011.001
GATEWAY
- 255.255.255.255
ON
Enables or disables the BONJOUR.
OFF
EXECUTE Returns the network settings to their default.
Control Panel
Explanation
Revision D
Applied
model
√ √
√ √
√ √
√ √
√ √
√ √
√ √
√ √
√ √
47