Table of Contents
Advertisement
Confidential
CAUTION:
When a dedicated printer unit and the TM printer are connected together, do not tap
power from the TM power connector. This connector does not have sufficient power for
two printers. Use an appropriate power supply (for example, the PS-170) available for
the TM printer.
The following TM printers can take power from the IR-320.
TM-T85/88 series
TM-U200 series
TM-6000H series
For information on how to set up the TM printer, see the user's guide for that printer.
Operation progress
1. Attach the printer tray to the IR-320.
2. Install the TM printer on the IR-320.
3. Confirm the operation of the TM printer.
4. The TM printer can be used.
Refer to the User's Guide of each printer for the instalation and the operation confirmation
procedure of the TM printer.
Installing a Dedicated TM Printer Unit
The following dedicated TM Printer units are available:
Model Name
TM-T88IIR
TM-U210AR
TM-H3000R
TM-T88IIR
The serial port for the dedicated TM Printer unit is assigned to COM3 by default.
Rev. C
Specification
Thermal printer (58 mm, 80 mm {2.3", 3.2"})
Serial impact dot matrix printer (two-color)
Thermal receipt with slip printer
TM-U210AR
IR-320 Technical Reference Manual
TM-H3000R
Setup 2-55
Advertisement
Table of Contents
