Table of Contents
Advertisement
Confidential
Battery
Attaaching the battery unit
Installing OS
Setting the BIOS
Installing the APM driver
(only Windows NT)
Installing the Power Button
tool (for Windows 98/2000)
Installing the AC line tool
(for Windows 2000/XP)
The setup completion
Refer to each item about the other peripheral devices and options.
Precautions for Setting Up
In addition to the precautions below, warning instructions and cautions to note are given at each
work stage.
CAUTION:
Turn off the power for all equipment, including the IR-320 and all peripherals, before
setup. Turn off the main (side) power switch for the IR-320. Unplug the power cables
for the IR-320 and its peripheral units from the outlet. If the power is not turned off, the
IR-320 or peripheral units may be damaged during setup.
When the battery unit is installed and the power is on, do not turn off the main (side)
power switch or unplug the power cable until you put the IR-320 in the soft off mode
with the soft (front) power switch. Then you can turn off the main power switch and
unplug the power cable. If the main power switch is turned off or the power cable is
unplugged when the unit is in full on mode, power starts flowing from the battery
unit. If power starts flowing from the battery unit, turn ON the main power switch,
which stops the power supply from the battery unit.
2-2 Setup
Required
Optional
Rev. C
Advertisement
Table of Contents
