Table of Contents
Advertisement
Installation
The instructions on the installation of this software are found in the Readme file in the
C:\Backup\Logon directory. For installation, use the following procedure:
1. Execute C:\backup\logon\Setup.exe. The Welcome dialog box is displayed. Click Next.
2. Specify the destination of the installation directory (C:\Program Files\EPSON\SEGina\
directory is the default). When Next is clicked, installation starts.
3. When installation is complete, the Setup Complete dialog box is displayed. Select Yes, and
click Finish to reboot the system.
CAUTION:
After installation of the SEGina in Windows NT 4.0 and Windows 2000, be sure to reboot
the system. If the Actinkey is executed without rebooting the system, trouble may occur.
If trouble occurs, reinstall the SEGina.
How to Use
The following three modules are installed:
SEGina—Controls logon with its main module
Logonkey—Software keyboard displayed at the time of logon
Actinkey—Software keyboard displayed after logon
In Windows NT 4.0, when the power to the system is turned on, the Logonkey is displayed
together with the Logon dialog box.
To use the software keyboard after the logon, select Actinkey from the Start menu. The Actinkey
menu is displayed.
When the check box at the top right is checked, the software keyboard is always displayed in the
upper part.
To exit Actinkey, click the upper right X.
Rev. C
IR-320 Technical Reference Manual
Utilities 4-51
Advertisement
Table of Contents
