Table of Contents
Advertisement
Installing the Serial Port Driver
When the serial port is transmitting with Windows 2000, this Driver prevents the OS from
shifting to the Standby mode and the operation of the full-on mode is continued.
When installing the service pack, install the serial driver again.
Note
Be sure an administrator installs the serial driver.
Install the serial port driver using the following procedure.
1. Insert the Driver CD-ROM for the IR-320 in the CD-ROM drive. Start
Win2K\Epserial\EPSERIAL.EXE.
2. Start serial driver Setup. The welcome screen is displayed. Click Next.
3. After installation is completed, the InstallShield Wizard Complete dialog box is displayed.
Select Yes, I want to restart my computer now; then click Finish to restart the system.
Uninstalling the serial port driver
Uninstall the serial port driver using the following procedure.
1. Open the Control Panel, and select Add/Remove Programs.
2. The Add/Remove Programs dialog box is displayed. Click Change or Remove Programs to
display a list of the currently installed programs. Change/Remove will be displayed when
EPSON Serial Driver is selected. Click Change/Remove.
3. The Confirm File Deletion dialog box is displayed. Click OK.
Installing the AC line tool
AC line tool
AC line tool
AC line tool
This tool is the utility to monitor the switching of the power of the system over to the battery
from the AC Line with Windows 2000 when the battery unit ( OI-R03 ) option is attached. For
details, see page 4-67.
Rev. C
IR-320 Series Technical Reference Manual
OS and Drivers 3-37
Advertisement
Table of Contents
