Table of Contents
Advertisement
Installation for Windows NT Locally Procured Edition
Note
If you use Windows NT, you need to install Service Pack 6a.
Installation Procedure
If you install Windows NT Local procured edition, follow the steps below.
Operating System Installation
Insert the CD-ROM for Windows NT and turn on the IR-320 to perform the
setup. Enter the product key of the COA package. You can set up the Network
automatically or set it up later.
Network Driver Installation
Install the software from the Driver CD-ROM for the IR-320.
Service Pack 6a Installation
Obtain Service Pack 6a and install it.
Set the HDD to the DMA mode by using Service pack 6a.
VIDEO Driver Installation
Sound Driver Installation
Touch Panel Driver Installation
Install the software from the Driver CD-ROM for the IR-320.
Other software Installation
When using OPOS-ADK, APD (Windows printer drivers) and Unimini,
install the software from the Driver CD-ROM for the IR-320.
Setup procedure
Windows NT is set up by using the following procedure:
1. Connect the keyboard and mouse to the IR-320.
2. Insert the CD-ROM of Windows NT in the CD-ROM drive and boot up the system.
3. The Welcome to Setup screen dialog box is displayed. Press the Enter key.
4. According to the instructions on the screen, input the necessary items and continue
installing.
5. The Windows NT Licensing Agreement dialog box is displayed. Press the PageDown key
and confirm contents to the last page. Press the F8 (I agree) key.
3-40 OS and Drivers
Rev. C
Advertisement
Table of Contents
