Setting A Password - Epson IR-320 Technical Reference Manual

Setting a Password

Select the password setting option (Set Supervisor Password or Set User Password)
from the main menu, and the following message is displayed in the center of the screen. Type a
password. The password is case sensitive and made up of up to eight alphanumeric characters.
ENTER PASSWORD:
Typing a password clears any previously entered password. After you press Enter, the message
below is displayed.
CONFIRM PASSWORD:
Retype the password you typed. If you do not want to use any password, simply press Enter at
both prompts. The password will be cleared, and the password function will be disabled.
If you forget your password, short pins 2 and 3 of jumper JP5 for IR-320 and turn on the power
to clear the contents of the CMOS. After clearing the CMOS, be sure to perform the following:
Remove the jumper cap from pins 2 and 3 of jumper JP5
Execute LOAD Optimized Defaults (from the main menu of the BIOS setup utility)
Reset BIOS (necessary items)
To abort the process, press Esc.
Rev.C
IR-320 Technical Reference Manual
5-31 BIOS Functions