Table of Contents
Advertisement
Confidential
4. Remove the retaining screw securing the slot cover. Keep the screw to secure the PCI board.
Save the PCI slot cover.
5. Push the board in firmly but carefully to insert it fully. You should feel the connectors fit into
place. If the board does not go in smoothly, do not force it; pull it all the way out, and try
again.
6. Lock the PCI board with the screws removed in step 4.
7. Reattach the side panel with two screws.
8. Reattach the side cover.
When you remove the PCI board, be sure to attach a slot cover.
Installing a Customer Display
The following customer displays can be connected to the IR-320.
Model name
DM-D110/210
DM-D500
DM-D110
2-62 Setup
Specification
20 characters x 2 lines
256 x 64 dots (graphics mode)
32 characters x 4 lines (font A) / 42 characters x 8 lines (font B)
DM-D210
DM-D500
Rev. C
Advertisement
Table of Contents
