Operations Before Setting Up The Ir-320; Operation Testing Products - Epson IR-320 Technical Reference Manual

Confidential
Static electricity can damage the components of the IR-320. Before you touch any
components, touch a grounded metal surface to discharge the static electricity in
your body. It is also recommended that you wear a grounded wristband and work
on an antistatic surface.
Do not touch the connectors. Dirt may cause a malfunction.
Do not apply excessive force to connectors, cables, or screws during connection.
Excessive force may damage the connectors or the screw threads.
Do not allow cables to be pinched. The cables may be damaged or disconnected.

Operations Before Setting Up the IR-320

Before setting up the IR-320, complete the following operations:
1. If Windows is running, exit it. The resulting power off condition is called "soft off." Proceed
to step 4.
2. Press the soft (front) power switch once and let go. The resulting power off condition is also
called "soft off." Proceed to step 4. If the power does not go off, proceed to step 4.
3. Press the soft power switch again, and hold it down for 4 seconds or more. The power
supply to the IR-320 will go off.
4. Turn off the main (side) power switch. The resulting power off condition is called
"mechanical off."
5. When the battery unit is attached, remove it.
6. Unplug the power cable. Confirm that power supplies to all peripheral units are off and
unplug the connection cables from them.

Operation Testing Products

The operation confirmation products are the ones that are built-in, included, or connected to
EPSON POS products, and their operation has been confirmed by EPSON. EPSON can offer
reference information for the selection of peripheral devices to the customer who constructs a
system using an EPSON POS product. Please ask EPSON or the selling agent what kind of
device can be used.
This operation confirmation evaluates the operation of the products in a usual environment, but
does not guarantee the operation. Therefore, the customer is basically responsible for the
procurement and the evaluation of the equipment.
Rev. C
IR-320 Technical Reference Manual
Setup 2-3