Installing The Network Driver - Epson IR-320 Technical Reference Manual

2. Copy \Dos62\CDROM\CDATAPI.SYS in the Driver CD-ROM for the IR-320 to the floppy
disk.
3. Turn on the IR-320 to start MS-DOS.
4. Insert the floppy disk copied by step 2 in the FDD of the IR-320.
5. Copy the CDATAPI.SYS on the floppy disk to the optional directory in the hard disk. For
example, copy it on C:\DOS\directory.
6. Add the following description to the CONFIG.SYS of MS-DOS with a text editor, and save it.
The following example is for copying to the C:\DOS\directory. In case of copying to other
directory, describe the directory name with its full path.
DEVICE=C:\DOS\CDATAPI.SYS /D:CDROM
7. Add the following description to the AUTOEXEC.BAT of the MS-DOS with a text editor,
and save it. The following example has MSCDEX.EXE in the C:\DOS\directory. If you have
it in another directory, describe the directory with its full path. In case of the /L option,
specify a drive name. The following is an example specifying the D drive. In case of
specifying the other drive name, describe the optional drive name.
C:\DOS\MSCDEX.EXE /D:CDROM /L:D
8. Restart MS-DOS.

Installing the Network Driver

The Network Driver is provided in the form compressed in the Driver CD-ROM for the IR-320.
MS-DOS cannot extract the compressed file. Therefore, by using another PC to read the
CD-ROM, install the Network driver to the IR-320 after extracting the Network driver in the
Driver CD-ROM for the IR-320.
Note
Windows 98, NT or 2000 is necessary for extracting the compressed file.
Extracting the network driver
Extract the compressed file of the Network Driver by the following procedure.
1. Start the other PC to read the CD-ROM, and start either Windows 98, NT, or 2000.
2. Insert the Driver CD-ROM for the IR-320 in the CD-ROM drive.
3. Start \Dos62\Network\PRODOS.EXE.
4. The Setup Wizard starts, and the License Agreement dialog box is displayed. Select [I accept
the terms in the license agreement] and click Next.
5. The dialog box that specifies the place of the copy of the file is displayed. Input the place and
click Next. The default setting is C:\Program Files\PRODOS.
6. When copying of the file is completed, the Release note is displayed.
Rev. C
IR-320 Series Technical Reference Manual
OS and Drivers 3-55